ODME Seil Seres S-3000

ODME Products

New Rules for Carrying

BioFuel Blends

have been applied as per

IMO/MARPOL regulations:

MEPC. 1/Circ.761/Rev1

and

MEPC. 240(65)

ASK THE EXPERTS

ODME cares for the Enviroment

ODME cares for the enviroment

Marine oil spills refers to oil that is released into the ocean and include among others releases of crude oil from tankers and heavier fuels used by large ships such as bunker fuel, or the spill of any oily refuse or waste oil.

Spills may take months or even years to clean up.

The ODME systems are responsible for keeping the environment clean and safe from the hydrocarbons contained in the waste waters of the ship’s slop tanks.

Those hydrocarbons are collected inside the slops tanks during the washing procedure of the cargo tanks. So when the ship is discharging the waste water contained inside the slop tanks back to the sea, the Oil Discharge Monitoring Equipment (ODME) makes sure - by continuous and on line monitoring - that the water discharged back to the sea is clean and free of any Hydrocarbons.

ODME Seil Seres S-3000

S-3000 Oil Discharge Monitoring Equipment

We are offering a range of fully refurbished – with 24 months Darlas - Hellas Warranty on exchange basis - or brand new SEIL SERES OIL DISCHARGE MONITORING EQUIPMENT Type ODME S-3000.

ODME SeilSeres S3000

This equipment is in full compliance with the current IMO/MARPOL Regulations MEPC 108(49) for Tanker Ships.

The Seil Seres S-3000 is suitable to be retrofitted to all existing Tanker Ships.

ODME S-3000 is required by MARPOL regulations and it’s a system for controlling the discharge into the sea of the oily products in ballast from the cargo spaces of tankers.

The System is approved in accordance with Resolution MEPC 108(49).

The S-3000 Seil Seres ODME system consists of the following major parts - units:

CONTROLLER,
OIL CONTENT METER,
MOTOR STARTER,
PRESSURE SWITCH,
MOTOR-SAMPLING PUMP ASSEMBLY,
PPM MEASURER,
HYDRAULIC PANEL,
SAMPLING PROBE,
DP TRANSMITTER as part of the flow meter,
PITOT TUBE as part of the flow meter

The Seil Seres ODME System supports features and options like:

Display of Ships Position GPS
Self-calibration,
Automatic zeroing,
Self-Cleaning of Measuring Vessel,
Across running,
Back flushing,
PPM Alarm,
Total Oil Limit Alarm,
Automatic Selection of Sample Monitoring
up to 3 channels etc.

The heart of the system is the Oil Content Meter, which uses an intrinsically safe multi cell detection system with fibres optics and automatic compensation, for detecting the actual PPM value of oil content.

Those are functions that have built inside the unit so the cost of maintenance will be kept as low as possible while the operation will be easily understood by the operator.

A very important feature for the Seil Seres ODME S-3000 is the compatibility of its Major-Individual Units which can enable the service engineer to offer to the ship owner to upgrade his non-functioning or obsolete or old ODME system with a refurbished Seil Seres System offered by DARLAS – HELLAS with a full 24-months Warranty on Exchange Basis. This Retrofit Upgrade can be done easily and at low cost even when the ship is in operation and most of the times without HOT WORK.

We at DARLAS - HELLAS with service attendances in more than 450 ships and with more than 25 Retrofit Installations and upgrades per year have a wealth of experience, which can assure you that you choose the right people to work with.

We Currently offer three ODME models for our retrofit installations. For Tanker Ships built before 2005 we offer either the Seres S.663 MK-III Model 911 ODME or the Seil Seres SS-2000. While for ships built after 2005 we offer the Seil Seres ODME model S-3000. Both systems can be offered either as Complete Refurbished or as Brand new Systems with full 24-months warranty time on exchange basis.

Please contact us for further details.

Download here the ODME Seil Seres S 3000 datasheet